diverse possibilità d'uso

in questa prima fase la maggior parte dei comandi deve essere eseguita con maggiori privilegi, quindi per evitare di anteporre sempre “sudo” a ogni comando, io preferisco digitare una volta per tutte:

sudo -i

e avremo la shell da root.

Si sa che le microSD hanno una vita limitata, di conseguenza può essere molto utile lavorare con un hdd esterno, vediamo come fare.
Ipotizziamo l'uso di un hdd esterno USB (da 2,5 o 3,5 non importa, l'importante è che il collegamento sia USB). Una volta connesso possiamo eseguire

dmesg

per identificare il device

[41594.095727] usb 1-1.5: new high-speed USB device number 5 using dwc_otg
[41594.197530] usb 1-1.5: New USB device found, idVendor=05e3, idProduct=0702
[41594.197571] usb 1-1.5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[41594.197591] usb 1-1.5: Product: USB TO IDE
[41594.212947] usb-storage 1-1.5:1.0: USB Mass Storage device detected
[41594.226025] usb-storage 1-1.5:1.0: Quirks match for vid 05e3 pid 0702: 520
[41594.226310] scsi host1: usb-storage 1-1.5:1.0
[41616.747294] usb 1-1.5: USB disconnect, device number 5
[41731.587025] usb 1-1.5: new high-speed USB device number 6 using dwc_otg
[41731.688817] usb 1-1.5: New USB device found, idVendor=05e3, idProduct=0702
[41731.688886] usb 1-1.5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[41731.688906] usb 1-1.5: Product: USB TO IDE
[41731.704280] usb-storage 1-1.5:1.0: USB Mass Storage device detected
[41731.705745] usb-storage 1-1.5:1.0: Quirks match for vid 05e3 pid 0702: 520
[41731.705970] scsi host2: usb-storage 1-1.5:1.0
[41732.712578] scsi 2:0:0:0: Direct-Access     HTS54808 0M9AT00          0811 PQ: 0 ANSI: 0
[41732.715079] sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[41732.716538] sd 2:0:0:0: [sda] Test WP failed, assume Write Enabled
[41732.726400] sd 2:0:0:0: [sda] Cache data unavailable
[41732.726450] sd 2:0:0:0: [sda] Assuming drive cache: write through
[41732.754346]  sda: sda1 sda2
[41732.762683] sd 2:0:0:0: [sda] Attached SCSI disk
[41732.774148] sd 2:0:0:0: Attached scsi generic sg0 type 0

Il disco esterno è quindi /dev/sda ma non sappiamo molto sul partizionamento. Lanciamo quindi

fdisk -l

Disk /dev/sda: 74.5 GiB, 80026361856 bytes, 156301488 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00000001
 
Device     Boot    Start       End  Sectors  Size Id Type
/dev/sda1           2048  81922047 81920000 39.1G 83 Linux
/dev/sda2       81922048 156301487 74379440 35.5G 83 Linux

Chiaramente questi sono solo esempi di output.
Ipotiziammo di avere un'unica partizione sulla quale vorremo installare il nostro raspbian. Dobbiamo innanzitutto formattarla:

 mke2fs -t ext4 -L rootfs /dev/sdxx 

Ora la montiamo

 mount /dev/sdxx /mnt

Ma prima di iniziare la copia dobbiamo installare “rsync” quindi

apt-get install rsync

Ora copiamo tutto su hdd

rsync -axv / /mnt

Una volta terminat la copia apriamo il file

vi /boot/cmdline.txt

e
SOSTITUIRE

root=/dev/mmcblk0p2

CON

root=/dev/sdxx

inoltre

vi /mnt/etc/fstab

e
SOSTITUIRE

/dev/mmcblk0p2  /               ext4    defaults,noatime  0       1

CON

/dev/sda2  /                    ext4    defaults,noatime  0       1

possiamo riavviare

reboot

una volta riaperta la shell verificare di usare realmente l'hdd andando nel file /etc/fstab.
Ce ne accorgeremo anche dal fatto che il led dell'hard disk subito dopo il riavvio inizierà a lampeggiare segno che sta lavorando.

Installiamo il server db mysql

apt-get install mysql-server mysql-client

risponderemo Y alla seguente proposta:

Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following extra packages will be installed:
 libaio1 libdbd-mysql-perl libdbi-perl libhtml-template-perl libmysqlclient18
 libterm-readkey-perl mysql-client-5.5 mysql-common mysql-server-5.5
 mysql-server-core-5.5
Suggested packages:
 libclone-perl libmldbm-perl libnet-daemon-perl libsql-statement-perl
 libipc-sharedcache-perl mailx tinyca
The following NEW packages will be installed:
 libaio1 libdbd-mysql-perl libdbi-perl libhtml-template-perl libmysqlclient18
 libterm-readkey-perl mysql-client mysql-client-5.5 mysql-common mysql-server
 mysql-server-5.5 mysql-server-core-5.5
0 upgraded, 12 newly installed, 0 to remove and 0 not upgraded.
Need to get 8,194 kB of archives.
After this operation, 88.9 MB of additional disk space will be used.
Do you want to continue? [Y/n]

installiamo il server web Apache

apt-get install apache2
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following extra packages will be installed:
  apache2-bin apache2-data apache2-utils libapr1 libaprutil1
  libaprutil1-dbd-sqlite3 libaprutil1-ldap liblua5.1-0 ssl-cert
Suggested packages:
  www-browser apache2-doc apache2-suexec-pristine apache2-suexec-custom
  openssl-blacklist
The following NEW packages will be installed:
  apache2 apache2-bin apache2-data apache2-utils libapr1 libaprutil1
  libaprutil1-dbd-sqlite3 libaprutil1-ldap liblua5.1-0 ssl-cert
0 upgraded, 10 newly installed, 0 to remove and 0 not upgraded.
Need to get 1,747 kB of archives.
After this operation, 5,236 kB of additional disk space will be used.
Do you want to continue? [Y/n] 

root@raspberrypi:~# apt-get install zoneminder
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following extra packages will be installed:
javascript-common libapache2-mod-php5 libarchive-zip-perl libasyncns0
libauthen-sasl-perl libavcodec56 libavdevice55 libavformat56 libavresample2
libavutil54 libcdio-cdda1 libcdio-paranoia1 libcdio13 libconvert-binhex-perl
libdate-manip-perl libdc1394-22 libdevice-serialport-perl libdrm-freedreno1
libdrm-nouveau2 libdrm-radeon1 libelf1 libemail-date-format-perl
libencode-locale-perl libfile-listing-perl libflac8 libfont-afm-perl
libgl1-mesa-dri libgl1-mesa-glx libglapi-mesa libgsm1 libhtml-form-perl
libhtml-format-perl libhtml-parser-perl libhtml-tagset-perl
libhtml-tree-perl libhttp-cookies-perl libhttp-daemon-perl libhttp-date-perl
libhttp-message-perl libhttp-negotiate-perl libice6 libio-html-perl
libio-socket-ssl-perl libjack-jackd2-0 libjs-mootools libllvm3.5
liblwp-mediatypes-perl liblwp-protocol-https-perl libmailtools-perl
libmime-lite-perl libmime-tools-perl libmime-types-perl libmp3lame0
libnet-http-perl libnet-libidn-perl libnet-smtp-ssl-perl libnet-ssleay-perl
libogg0 libonig2 libopenjpeg5 libopus0 liborc-0.4-0 libperl4-corelibs-perl
libphp-serialization-perl libpulse0 libqdbm14 libraw1394-11
libschroedinger-1.0-0 libsm6 libsndfile1 libspeex1 libswscale3
libsys-mmap-perl libtheora0 libtxc-dxtn-s2tc0 liburi-perl libva1 libvdpau1
libvorbis0a libvorbisenc2 libvpx1 libwww-perl libwww-robotrules-perl
libx11-xcb1 libx264-142 libxcb-dri2-0 libxcb-dri3-0 libxcb-glx0
libxcb-present0 libxcb-sync1 libxdamage1 libxfixes3 libxi6 libxshmfence1
libxtst6 libxvidcore4 libxxf86vm1 lsof php5 php5-cli php5-common php5-json
php5-mysql php5-readline va-driver-all vdpau-va-driver x11-common zip
Suggested packages:
php-pear libdigest-hmac-perl libgssapi-perl libdata-dump-perl jackd2
libcrypt-ssleay-perl default-mta mail-transport-agent libmojolicious-perl
opus-tools pulseaudio libraw1394-doc speex vdpau-driver libauthen-ntlm-perl
php5-user-cache
The following NEW packages will be installed:
javascript-common libapache2-mod-php5 libarchive-zip-perl libasyncns0
libauthen-sasl-perl libavcodec56 libavdevice55 libavformat56 libavresample2
libavutil54 libcdio-cdda1 libcdio-paranoia1 libcdio13 libconvert-binhex-perl
libdate-manip-perl libdc1394-22 libdevice-serialport-perl libdrm-freedreno1
libdrm-nouveau2 libdrm-radeon1 libelf1 libemail-date-format-perl
libencode-locale-perl libfile-listing-perl libflac8 libfont-afm-perl
libgl1-mesa-dri libgl1-mesa-glx libglapi-mesa libgsm1 libhtml-form-perl
libhtml-format-perl libhtml-parser-perl libhtml-tagset-perl
libhtml-tree-perl libhttp-cookies-perl libhttp-daemon-perl libhttp-date-perl
libhttp-message-perl libhttp-negotiate-perl libice6 libio-html-perl
libio-socket-ssl-perl libjack-jackd2-0 libjs-mootools libllvm3.5
liblwp-mediatypes-perl liblwp-protocol-https-perl libmailtools-perl
libmime-lite-perl libmime-tools-perl libmime-types-perl libmp3lame0
libnet-http-perl libnet-libidn-perl libnet-smtp-ssl-perl libnet-ssleay-perl
libogg0 libonig2 libopenjpeg5 libopus0 liborc-0.4-0 libperl4-corelibs-perl
libphp-serialization-perl libpulse0 libqdbm14 libraw1394-11
libschroedinger-1.0-0 libsm6 libsndfile1 libspeex1 libswscale3
libsys-mmap-perl libtheora0 libtxc-dxtn-s2tc0 liburi-perl libva1 libvdpau1
  libvorbis0a libvorbisenc2 libvpx1 libwww-perl libwww-robotrules-perl
  libx11-xcb1 libx264-142 libxcb-dri2-0 libxcb-dri3-0 libxcb-glx0
  libxcb-present0 libxcb-sync1 libxdamage1 libxfixes3 libxi6 libxshmfence1
  libxtst6 libxvidcore4 libxxf86vm1 lsof php5 php5-cli php5-common php5-json
  php5-mysql php5-readline va-driver-all vdpau-va-driver x11-common zip
  zoneminder
0 upgraded, 109 newly installed, 0 to remove and 0 not upgraded.
Need to get 27.7 MB of archives.
After this operation, 107 MB of additional disk space will be used.
Do you want to continue? [Y/n] 

Al termine è necessario copiare rinominando il seguente file nella cartella di Apache “sites-enabled”

cp /etc/zm/apache.conf /etc/apache2/sites-enabled/zm.conf

e poi bisogna installare anche

apt-get install libvlc-dev libvlccore-dev vlc
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following extra packages will be installed:
adwaita-icon-theme at-spi2-core colord colord-data dconf-gsettings-backend dconf-service fontconfig
fontconfig-config fonts-dejavu-core fonts-freefont-ttf glib-networking glib-networking-common
glib-networking-services gsettings-desktop-schemas hicolor-icon-theme liba52-0.7.4 libaa1 libaacs0 libasn1-8-heimdal
libass5 libatk-bridge2.0-0 libatk1.0-0 libatk1.0-data libatspi2.0-0 libaudio2 libavahi-client3 libavc1394-0
libbasicusageenvironment0 libbluray1 libcaca0 libcairo-gobject2 libcairo2 libcanberra-gtk3-0 libcanberra-gtk3-module
libcanberra0 libcddb2 libchromaprint0 libcolord2 libcolorhug2 libcroco3 libcups2 libdatrie1 libdca0 libdconf1
libdirectfb-1.2-9 libdvbpsi9 libdvdnav4 libdvdread4 libebml4 libegl1-mesa libegl1-mesa-drivers libenca0 libexif12
libfaad2 libfile-basedir-perl libfile-copy-recursive-perl libfile-desktopentry-perl libfile-mimeinfo-perl
libfontconfig1 libfontenc1 libfreerdp-cache1.1 libfreerdp-client1.1 libfreerdp-codec1.1 libfreerdp-common1.1.0
libfreerdp-core1.1 libfreerdp-crypto1.1 libfreerdp-gdi1.1 libfreerdp-locale1.1 libfreerdp-primitives1.1
libfreerdp-rail1.1 libfreerdp-utils1.1 libfribidi0 libgbm1 libgd3 libgdk-pixbuf2.0-0 libgdk-pixbuf2.0-common
libgles1-mesa libgles2-mesa libgphoto2-6 libgphoto2-l10n libgphoto2-port10 libgpm2 libgraphite2-3 libgroupsock1
libgssapi3-heimdal libgtk-3-0 libgtk-3-bin libgtk-3-common libgtk2.0-0 libgtk2.0-bin libgtk2.0-common libgudev-1.0-0
libgusb2 libharfbuzz0b libhcrypto4-heimdal libheimbase1-heimdal libheimntlm0-heimdal libhx509-5-heimdal
libieee1284-3 libiso9660-8 libjasper1 libjbig0 libjpeg8 libjson-glib-1.0-0 libjson-glib-1.0-common libkate1
libkrb5-26-heimdal liblcms2-2 libldb1 liblircclient0 liblivemedia23 libltdl7 liblua5.2-0 libmad0 libmatroska6
libmng1 libmodplug1 libmpcdec6 libmpeg2-4 libmtp-common libmtp-runtime libmtp9 libnet-dbus-perl libnotify4 libntdb1
libopenvg1-mesa libpam-systemd libpango-1.0-0 libpangocairo-1.0-0 libpangoft2-1.0-0 libpixman-1-0
libpolkit-agent-1-0 libpolkit-backend-1-0 libpolkit-gobject-1-0 libpostproc52 libproxy-tools libproxy1 libqtcore4
libqtgui4 libresid-builder0c2a librest-0.7-0 libroken18-heimdal librsvg2-2 librsvg2-common libsane libsane-common
libsane-extras libsane-extras-common libsdl-image1.2 libsdl1.2debian libshine3 libshout3 libsidplay2 libsmbclient
libsoup-gnome2.4-1 libsoup2.4-1 libspeexdsp1 libtag1-vanilla libtag1c2a libtdb1 libtevent0 libthai-data libthai0
libtie-ixhash-perl libtiff5 libtwolame0 libupnp6 libusageenvironment1 libva-drm1 libva-x11-1 libvcdinfo0 libvlc5
libvlccore8 libvncclient0 libvorbisfile3 libwayland-client0 libwayland-cursor0 libwayland-egl1-mesa
libwayland-server0 libwebp5 libwind0-heimdal libwinpr-crt0.1 libwinpr-crypto0.1 libwinpr-dsparse0.1
libwinpr-environment0.1 libwinpr-file0.1 libwinpr-handle0.1 libwinpr-heap0.1 libwinpr-input0.1
libwinpr-interlocked0.1 libwinpr-library0.1 libwinpr-path0.1 libwinpr-pool0.1 libwinpr-registry0.1 libwinpr-rpc0.1
libwinpr-sspi0.1 libwinpr-synch0.1 libwinpr-sysinfo0.1 libwinpr-thread0.1 libwinpr-utils0.1 libx11-protocol-perl
libxaw7 libxcb-composite0 libxcb-keysyms1 libxcb-randr0 libxcb-render0 libxcb-shape0 libxcb-shm0 libxcb-xfixes0
libxcb-xv0 libxcomposite1 libxcursor1 libxft2 libxinerama1 libxkbcommon0 libxkbfile1 libxml-parser-perl
libxml-twig-perl libxml-xpathengine-perl libxmu6 libxpm4 libxrandr2 libxrender1 libxt6 libxv1 libxxf86dga1
libzvbi-common libzvbi0 notification-daemon policykit-1 python-talloc qtcore4-l10n samba-libs sane-utils
update-inetd vlc-data vlc-nox vlc-plugin-notify vlc-plugin-samba x11-utils x11-xserver-utils xdg-utils
Suggested packages:
nas libbluray-bdj libcanberra-gtk0 libcanberra-pulse libchromaprint-tools python-acoustid cups-common libdvdcss2
freerdp-x11 libgd-tools gphoto2 gtkam gpm gvfs libjasper-runtime liblcms2-utils lirc qt4-qtconfig librsvg2-bin hplip
hpoj libunicode-map8-perl libunicode-string-perl xml-twig-tools unpaper videolan-doc mesa-utils nickle cairo-5c
xorg-docs-core gvfs-bin
The following NEW packages will be installed:
adwaita-icon-theme at-spi2-core colord colord-data dconf-gsettings-backend dconf-service fontconfig
fontconfig-config fonts-dejavu-core fonts-freefont-ttf glib-networking glib-networking-common
glib-networking-services gsettings-desktop-schemas hicolor-icon-theme liba52-0.7.4 libaa1 libaacs0 libasn1-8-heimdal
libass5 libatk-bridge2.0-0 libatk1.0-0 libatk1.0-data libatspi2.0-0 libaudio2 libavahi-client3 libavc1394-0
libbasicusageenvironment0 libbluray1 libcaca0 libcairo-gobject2 libcairo2 libcanberra-gtk3-0 libcanberra-gtk3-module
libcanberra0 libcddb2 libchromaprint0 libcolord2 libcolorhug2 libcroco3 libcups2 libdatrie1 libdca0 libdconf1
libdirectfb-1.2-9 libdvbpsi9 libdvdnav4 libdvdread4 libebml4 libegl1-mesa libegl1-mesa-drivers libenca0 libexif12
libfaad2 libfile-basedir-perl libfile-copy-recursive-perl libfile-desktopentry-perl libfile-mimeinfo-perl
libfontconfig1 libfontenc1 libfreerdp-cache1.1 libfreerdp-client1.1 libfreerdp-codec1.1 libfreerdp-common1.1.0
libfreerdp-core1.1 libfreerdp-crypto1.1 libfreerdp-gdi1.1 libfreerdp-locale1.1 libfreerdp-primitives1.1
libfreerdp-rail1.1 libfreerdp-utils1.1 libfribidi0 libgbm1 libgd3 libgdk-pixbuf2.0-0 libgdk-pixbuf2.0-common
libgles1-mesa libgles2-mesa libgphoto2-6 libgphoto2-l10n libgphoto2-port10 libgpm2 libgraphite2-3 libgroupsock1
libgssapi3-heimdal libgtk-3-0 libgtk-3-bin libgtk-3-common libgtk2.0-0 libgtk2.0-bin libgtk2.0-common libgudev-1.0-0
libgusb2 libharfbuzz0b libhcrypto4-heimdal libheimbase1-heimdal libheimntlm0-heimdal libhx509-5-heimdal
libieee1284-3 libiso9660-8 libjasper1 libjbig0 libjpeg8 libjson-glib-1.0-0 libjson-glib-1.0-common libkate1
libkrb5-26-heimdal liblcms2-2 libldb1 liblircclient0 liblivemedia23 libltdl7 liblua5.2-0 libmad0 libmatroska6
libmng1 libmodplug1 libmpcdec6 libmpeg2-4 libmtp-common libmtp-runtime libmtp9 libnet-dbus-perl libnotify4 libntdb1
libopenvg1-mesa libpam-systemd libpango-1.0-0 libpangocairo-1.0-0 libpangoft2-1.0-0 libpixman-1-0
libpolkit-agent-1-0 libpolkit-backend-1-0 libpolkit-gobject-1-0 libpostproc52 libproxy-tools libproxy1 libqtcore4
libqtgui4 libresid-builder0c2a librest-0.7-0 libroken18-heimdal librsvg2-2 librsvg2-common libsane libsane-common
libsane-extras libsane-extras-common libsdl-image1.2 libsdl1.2debian libshine3 libshout3 libsidplay2 libsmbclient
libsoup-gnome2.4-1 libsoup2.4-1 libspeexdsp1 libtag1-vanilla libtag1c2a libtdb1 libtevent0 libthai-data libthai0
libtie-ixhash-perl libtiff5 libtwolame0 libupnp6 libusageenvironment1 libva-drm1 libva-x11-1 libvcdinfo0 libvlc-dev
libvlc5 libvlccore-dev libvlccore8 libvncclient0 libvorbisfile3 libwayland-client0 libwayland-cursor0
libwayland-egl1-mesa libwayland-server0 libwebp5 libwind0-heimdal libwinpr-crt0.1 libwinpr-crypto0.1
libwinpr-dsparse0.1 libwinpr-environment0.1 libwinpr-file0.1 libwinpr-handle0.1 libwinpr-heap0.1 libwinpr-input0.1
libwinpr-interlocked0.1 libwinpr-library0.1 libwinpr-path0.1 libwinpr-pool0.1 libwinpr-registry0.1 libwinpr-rpc0.1
libwinpr-sspi0.1 libwinpr-synch0.1 libwinpr-sysinfo0.1 libwinpr-thread0.1 libwinpr-utils0.1 libx11-protocol-perl
libxaw7 libxcb-composite0 libxcb-keysyms1 libxcb-randr0 libxcb-render0 libxcb-shape0 libxcb-shm0 libxcb-xfixes0
libxcb-xv0 libxcomposite1 libxcursor1 libxft2 libxinerama1 libxkbcommon0 libxkbfile1 libxml-parser-perl
libxml-twig-perl libxml-xpathengine-perl libxmu6 libxpm4 libxrandr2 libxrender1 libxt6 libxv1 libxxf86dga1
libzvbi-common libzvbi0 notification-daemon policykit-1 python-talloc qtcore4-l10n samba-libs sane-utils
update-inetd vlc vlc-data vlc-nox vlc-plugin-notify vlc-plugin-samba x11-utils x11-xserver-utils xdg-utils
0 upgraded, 245 newly installed, 0 to remove and 0 not upgraded.
Need to get 76.4 MB of archives.
After this operation, 260 MB of additional disk space will be used.
Do you want to continue? [Y/n] 

però qui c'è un errore in fondo

quindi ho rifatto un

apt-get update

poi di nuovo

apt-get install libvlc-dev libvlccore-dev vlc
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following extra packages will be installed:
adwaita-icon-theme at-spi2-core colord colord-data dconf-gsettings-backend dconf-service fontconfig
fontconfig-config fonts-dejavu-core fonts-freefont-ttf glib-networking glib-networking-common
glib-networking-services gsettings-desktop-schemas hicolor-icon-theme liba52-0.7.4 libaa1 libaacs0 libasn1-8-heimdal
libass5 libatk-bridge2.0-0 libatk1.0-0 libatk1.0-data libatspi2.0-0 libaudio2 libavahi-client3 libavc1394-0
libbasicusageenvironment0 libbluray1 libcaca0 libcairo-gobject2 libcairo2 libcanberra-gtk3-0 libcanberra-gtk3-module
libcanberra0 libcddb2 libchromaprint0 libcolord2 libcolorhug2 libcroco3 libcups2 libdatrie1 libdca0 libdconf1
libdirectfb-1.2-9 libdrm2 libdvbpsi9 libdvdnav4 libdvdread4 libebml4 libegl1-mesa libenca0 libexif12 libfaad2
libfile-basedir-perl libfile-copy-recursive-perl libfile-desktopentry-perl libfile-mimeinfo-perl libfontconfig1
libfontenc1 libfreerdp-cache1.1 libfreerdp-client1.1 libfreerdp-codec1.1 libfreerdp-common1.1.0 libfreerdp-core1.1
libfreerdp-crypto1.1 libfreerdp-gdi1.1 libfreerdp-locale1.1 libfreerdp-primitives1.1 libfreerdp-rail1.1
libfreerdp-utils1.1 libfribidi0 libgbm1 libgd3 libgdk-pixbuf2.0-0 libgdk-pixbuf2.0-common libgl1-mesa-glx
libglapi-mesa libgles1-mesa libgles2-mesa libgphoto2-6 libgphoto2-l10n libgphoto2-port10 libgpm2 libgraphite2-3
libgroupsock1 libgssapi3-heimdal libgtk-3-0 libgtk-3-bin libgtk-3-common libgtk2.0-0 libgtk2.0-bin libgtk2.0-common
libgudev-1.0-0 libgusb2 libharfbuzz0b libhcrypto4-heimdal libheimbase1-heimdal libheimntlm0-heimdal
libhx509-5-heimdal libieee1284-3 libiso9660-8 libjasper1 libjbig0 libjpeg8 libjson-glib-1.0-0
libjson-glib-1.0-common libkate1 libkrb5-26-heimdal liblcms2-2 libldb1 liblircclient0 liblivemedia23 libltdl7
liblua5.2-0 libmad0 libmatroska6 libmng1 libmodplug1 libmpcdec6 libmpeg2-4 libmtp-common libmtp-runtime libmtp9
libnet-dbus-perl libnotify4 libntdb1 libpam-systemd libpango-1.0-0 libpangocairo-1.0-0 libpangoft2-1.0-0
libpixman-1-0 libpolkit-agent-1-0 libpolkit-backend-1-0 libpolkit-gobject-1-0 libpostproc52 libproxy-tools libproxy1
libqtcore4 libqtgui4 libresid-builder0c2a librest-0.7-0 libroken18-heimdal librsvg2-2 librsvg2-common libsane
libsane-common libsane-extras libsane-extras-common libsdl-image1.2 libsdl1.2debian libshine3 libshout3 libsidplay2
libsmbclient libsoup-gnome2.4-1 libsoup2.4-1 libspeexdsp1 libtag1-vanilla libtag1c2a libtdb1 libtevent0 libthai-data
libthai0 libtie-ixhash-perl libtiff5 libtwolame0 libupnp6 libusageenvironment1 libva-drm1 libva-x11-1 libvcdinfo0
libvlc5 libvlccore8 libvncclient0 libvorbisfile3 libwayland-client0 libwayland-cursor0 libwayland-server0 libwebp5
libwind0-heimdal libwinpr-crt0.1 libwinpr-crypto0.1 libwinpr-dsparse0.1 libwinpr-environment0.1 libwinpr-file0.1
libwinpr-handle0.1 libwinpr-heap0.1 libwinpr-input0.1 libwinpr-interlocked0.1 libwinpr-library0.1 libwinpr-path0.1
libwinpr-pool0.1 libwinpr-registry0.1 libwinpr-rpc0.1 libwinpr-sspi0.1 libwinpr-synch0.1 libwinpr-sysinfo0.1
libwinpr-thread0.1 libwinpr-utils0.1 libx11-protocol-perl libxaw7 libxcb-composite0 libxcb-keysyms1 libxcb-randr0
libxcb-render0 libxcb-shape0 libxcb-shm0 libxcb-xfixes0 libxcb-xv0 libxcomposite1 libxcursor1 libxft2 libxinerama1
libxkbcommon0 libxkbfile1 libxml-parser-perl libxml-twig-perl libxml-xpathengine-perl libxmu6 libxpm4 libxrandr2
libxrender1 libxt6 libxv1 libxxf86dga1 libzvbi-common libzvbi0 notification-daemon policykit-1 python-talloc
qtcore4-l10n samba-libs sane-utils update-inetd vlc-data vlc-nox vlc-plugin-notify vlc-plugin-samba x11-utils
x11-xserver-utils xdg-utils
Suggested packages:
nas libbluray-bdj libcanberra-gtk0 libcanberra-pulse libchromaprint-tools python-acoustid cups-common libdvdcss2
freerdp-x11 libgd-tools gphoto2 gtkam gpm gvfs libjasper-runtime liblcms2-utils lirc qt4-qtconfig librsvg2-bin hplip
hpoj libunicode-map8-perl libunicode-string-perl xml-twig-tools unpaper videolan-doc mesa-utils nickle cairo-5c
xorg-docs-core gvfs-bin
The following NEW packages will be installed:
adwaita-icon-theme at-spi2-core colord colord-data dconf-gsettings-backend dconf-service fontconfig
fontconfig-config fonts-dejavu-core fonts-freefont-ttf glib-networking glib-networking-common
glib-networking-services gsettings-desktop-schemas hicolor-icon-theme liba52-0.7.4 libaa1 libaacs0 libasn1-8-heimdal
libass5 libatk-bridge2.0-0 libatk1.0-0 libatk1.0-data libatspi2.0-0 libaudio2 libavahi-client3 libavc1394-0
libbasicusageenvironment0 libbluray1 libcaca0 libcairo-gobject2 libcairo2 libcanberra-gtk3-0 libcanberra-gtk3-module
libcanberra0 libcddb2 libchromaprint0 libcolord2 libcolorhug2 libcroco3 libcups2 libdatrie1 libdca0 libdconf1
libdirectfb-1.2-9 libdvbpsi9 libdvdnav4 libdvdread4 libebml4 libegl1-mesa libenca0 libexif12 libfaad2
libfile-basedir-perl libfile-copy-recursive-perl libfile-desktopentry-perl libfile-mimeinfo-perl libfontconfig1
libfontenc1 libfreerdp-cache1.1 libfreerdp-client1.1 libfreerdp-codec1.1 libfreerdp-common1.1.0 libfreerdp-core1.1
libfreerdp-crypto1.1 libfreerdp-gdi1.1 libfreerdp-locale1.1 libfreerdp-primitives1.1 libfreerdp-rail1.1
libfreerdp-utils1.1 libfribidi0 libgbm1 libgd3 libgdk-pixbuf2.0-0 libgdk-pixbuf2.0-common libgles1-mesa
libgles2-mesa libgphoto2-6 libgphoto2-l10n libgphoto2-port10 libgpm2 libgraphite2-3 libgroupsock1 libgssapi3-heimdal
libgtk-3-0 libgtk-3-bin libgtk-3-common libgtk2.0-0 libgtk2.0-bin libgtk2.0-common libgudev-1.0-0 libgusb2
libharfbuzz0b libhcrypto4-heimdal libheimbase1-heimdal libheimntlm0-heimdal libhx509-5-heimdal libieee1284-3
libiso9660-8 libjasper1 libjbig0 libjpeg8 libjson-glib-1.0-0 libjson-glib-1.0-common libkate1 libkrb5-26-heimdal
liblcms2-2 libldb1 liblircclient0 liblivemedia23 libltdl7 liblua5.2-0 libmad0 libmatroska6 libmng1 libmodplug1
libmpcdec6 libmpeg2-4 libmtp-common libmtp-runtime libmtp9 libnet-dbus-perl libnotify4 libntdb1 libpam-systemd
libpango-1.0-0 libpangocairo-1.0-0 libpangoft2-1.0-0 libpixman-1-0 libpolkit-agent-1-0 libpolkit-backend-1-0
libpolkit-gobject-1-0 libpostproc52 libproxy-tools libproxy1 libqtcore4 libqtgui4 libresid-builder0c2a librest-0.7-0
libroken18-heimdal librsvg2-2 librsvg2-common libsane libsane-common libsane-extras libsane-extras-common
libsdl-image1.2 libsdl1.2debian libshine3 libshout3 libsidplay2 libsmbclient libsoup-gnome2.4-1 libsoup2.4-1
libspeexdsp1 libtag1-vanilla libtag1c2a libtdb1 libtevent0 libthai-data libthai0 libtie-ixhash-perl libtiff5
libtwolame0 libupnp6 libusageenvironment1 libva-drm1 libva-x11-1 libvcdinfo0 libvlc-dev libvlc5 libvlccore-dev
libvlccore8 libvncclient0 libvorbisfile3 libwayland-client0 libwayland-cursor0 libwayland-server0 libwebp5
libwind0-heimdal libwinpr-crt0.1 libwinpr-crypto0.1 libwinpr-dsparse0.1 libwinpr-environment0.1 libwinpr-file0.1
libwinpr-handle0.1 libwinpr-heap0.1 libwinpr-input0.1 libwinpr-interlocked0.1 libwinpr-library0.1 libwinpr-path0.1
libwinpr-pool0.1 libwinpr-registry0.1 libwinpr-rpc0.1 libwinpr-sspi0.1 libwinpr-synch0.1 libwinpr-sysinfo0.1
libwinpr-thread0.1 libwinpr-utils0.1 libx11-protocol-perl libxaw7 libxcb-composite0 libxcb-keysyms1 libxcb-randr0
libxcb-render0 libxcb-shape0 libxcb-shm0 libxcb-xfixes0 libxcb-xv0 libxcomposite1 libxcursor1 libxft2 libxinerama1
libxkbcommon0 libxkbfile1 libxml-parser-perl libxml-twig-perl libxml-xpathengine-perl libxmu6 libxpm4 libxrandr2
libxrender1 libxt6 libxv1 libxxf86dga1 libzvbi-common libzvbi0 notification-daemon policykit-1 python-talloc
qtcore4-l10n samba-libs sane-utils update-inetd vlc vlc-data vlc-nox vlc-plugin-notify vlc-plugin-samba x11-utils
x11-xserver-utils xdg-utils
The following packages will be upgraded:
libdrm2 libgl1-mesa-glx libglapi-mesa
3 upgraded, 242 newly installed, 0 to remove and 17 not upgraded.
Need to get 700 kB/73.3 MB of archives.
After this operation, 249 MB of additional disk space will be used.
Do you want to continue? [Y/n] 

stavolta non mi ha dato errori…

comunque sto ancora facendo delle prove da qui…
https://wiki.zoneminder.com/Raspbian
https://wiki.zoneminder.com/Debian_8.1_64-bit_with_Zoneminder_1.28.1_the_Easy_Way